SR250 Classic Fork Rebuild/Seal Replacement

The left fork on our SR250 Classic test mule had been leaking since we purchased it and it was just getting worse and worse. It started spewing out fork oil all over the fork brace and even down the leg and onto the brake - making it dangerous. Even the right leg was leaking a little. So it was time to replace the seals and fill up with some fresh fork oil as well. Little did I know, this would be a nightmare to do! I'll sum up the process below. Leaky forks, easy enough to get off the bike. Leaky SR250 Classic fork seals. First step was to remove the forks from the bike obviously! This means removing the wheel and brake set up. But here is an important tip before loosening the triple

  • Facebook Clean Grey
  • Instagram Clean Grey